
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X40-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 40mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X40-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32mm bore, a 40mm nominal stroke, and a PT tapered port. The integrated -S magnet enables position sensing with AirTAC CMSE reed or DMSE electronic switches. By turning the rear screw, you achieve a usable travel window of 10-40mm, allowing precise end-position tuning without swapping hardware.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Remember that the rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure; for dead-air locking, consider an SAIL or BSAI variant.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X40-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 10-40mm travel window when switching between part sizes on a packaging line, using the rear screw to set new retract endpoints instantly.
Leverage the -S magnet with DMSE electronic switches to verify exact positions while fine-tuning the stroke stop during initial machine commissioning.
Apply 402N of clamping force in tight assemblies where the 32mm profile footprint is required, adjusting the stroke to accommodate varying material thicknesses.
The 30mm adjustment range is ideal for dialing in exact end stops during machine commissioning or product changeovers, avoiding the need to fabricate external spacers. Unlike a fixed-stroke SAI cylinder, this adjustable model lets you trim the retract distance on the fly.
To match this exact replacement, specify: 32mm bore, 40mm nominal stroke, 30mm adjustment range, PT port threads, and the -S magnet option. Mounting is limited to the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. Because the 40mm stroke is short, side-load risks are minimal, but always ensure the M10x1.25 rod thread is aligned to prevent binding.
Quick checklist
At the maximum 1.0MPa pressure, it can deliver up to 82kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 40mm nominal stroke down to a minimum of 10mm. This creates a 10-40mm usable travel window for fine-tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.