
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X40-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 40mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X40-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The integrated adjuster provides a usable travel window of 0-40mm, allowing you to dial back the full 40mm stroke precisely to zero without swapping out the unit.
This adjustable stop is ideal for commissioning setups where exact end positions must be fine-tuned on the fly. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X40-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 0-40mm travel window during commissioning to hit exact sensor or clamping positions without adding external stopper blocks.
Quickly adjust the retract end-position on packaging lines when switching product sizes, reducing downtime between format changes.
Dial in the exact stroke end-point for small parts assembly, using the rear stopper to compensate for mechanical tolerances.
The rear screw acts as a travel stop, not a lock, so it cannot hold a load without live air. For load-holding without pressure, consider SAIL or BSAI cylinders. Because the stroke is short, side-load risks are minimal, but always guide the rod for lateral stability. To match this ISO 15552 interchangeable unit, specify bore 32, stroke 40, adjustment 40, PT tapered port thread, and no magnet.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from 40mm down to 0mm. It functions as a mechanical stop that sets the retract end-position, but it is not a lock and requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.