
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X400-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the travel by up to 100 mm. This creates a usable 300-400 mm adjustable stroke window, giving you exact end-position control during commissioning without swapping out the actuator.
Because the nominal 400 mm stroke is relatively long for a 32 mm bore, the integrated rear stopper acts purely as a travel deceleration point rather than a load lock. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments. Threaded PT ports and variable air cushions at both ends manage the kinetic energy of the moving piston.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 300-400 mm end position during product size transitions without physically replacing the cylinder or bolting on external stopper blocks.
Dial in the exact retract distance up to 100 mm to accommodate multiple part lengths on the same fixture.
Modify the diverter stroke window on the fly to handle varying package dimensions without halting the line for mechanical modifications.
If your setup demands higher thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The rear adjuster screw is ideal for product changeovers on a line, allowing variable end-stops without adding external physical stops.
For any stroke length of 400 mm, the unsupported load increases side-load stress on the front cap. Despite the robust 12 mm rod, you should use an external guide rail to prevent binding. Remember that the adjuster and air cushions do not hold the load without live air pressure; if you need true load-holding, select the SAIL or BSAI series, or use an external pilot-operated check valve. This model is dimensionally interchangeable per ISO 15552, using a PT port, carbon steel rod, and no magnet.
Quick checklist
It features a rear adjusting screw that lets you shorten the effective stroke by up to 100 mm, providing a usable travel window of 300 to 400 mm. The screw acts as a mechanical stop to set the end position, but it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.