
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X400-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows operators to fine-tune end positions during commissioning without swapping out the entire cylinder.
This variant includes a magnet for position sensing and uses a standard carbon steel rod with PT tapered port threads (G1/8). The extruded aluminum barrel incorporates sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic solid-state switches. It relies on adjustable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 300-400mm stroke window on the fly to accommodate different package lengths on a packaging line without changing cylinders.
Set precise retract positions for sorting diverter arms on a conveyor, adjusting the stopper screw to fine-tune the resting state.
Perfect for commissioning custom fixtures where the exact extend distance needs micro-adjustments after initial assembly.
Choose this 32mm bore when an application demands a highly variable end-stop within a 300-400mm travel range, such as accommodating multiple product sizes on a single conveyor line. The integrated rear adjuster acts purely as a mechanical stop to set the retract position; it does not hold the load without live air pressure. For load-holding requirements, consider an AirTAC SAIL or BSAI cylinder.
Because this model features a 400mm stroke, the 12mm rod and M10x1.25 rod thread will experience amplified side-loading moments if the load is unsupported. An external guide rail is strongly recommended to prevent binding. As a dimensionally interchangeable ISO 15552 cylinder, it matches standard mounting footprints and accepts Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 100mm. This transforms the fixed 400mm stroke into a 300-400mm adjustable travel window, letting you set the exact end position without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.