
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X400-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in rear screw allows you to fine-tune the effective travel, providing a usable stroke window of 390-400mm to perfectly dial in end positions without adding external stops.
This variant includes a magnet for position sensing, supporting AirTAC CMSE reed and DMSE electronic solid-state switches housed in the dual-side sensor grooves. It utilizes PT tapered port threading (G1/8) and offers adjustable air cushions at both ends to decelerate the load. The rear stopper acts purely as a travel limit and does not hold the load without continuous air pressure; for dead-load holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 390-400mm end position during initial commissioning to avoid machining custom external stoppers.
Quickly adjust the travel window by up to 10mm on packaging lines handling slightly different carton sizes.
Use the rear screw to fine-tune the retract position without altering the fixed mounting points of the cylinder.
The 10mm adjustment range is perfect for product changeovers where a fixed-stroke SAI cylinder would require shimming or swapping.
Because the 400mm stroke is relatively long for a 32mm bore, the 12mm rod and M10x1.25 thread handle moderate side loads, but an external guide is recommended to prevent rod binding. To match this ISO 15552 interchangeable cylinder, specify the 32mm bore, 400mm stroke, 10mm adjustment, PT port, and the -S magnet option. Note that SAIJ uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets.
Quick checklist
The rear adjuster screw acts as a mechanical stop that shortens the nominal 400mm stroke by up to 10mm, giving a usable travel window of 390-400mm. It decelerates the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.