verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke400 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$90.95 $98.45Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-20S

The AirTAC SAIJ32X400-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 380-400 mm usable travel window, allowing you to dial back the 400 mm nominal stroke by up to 20 mm during machine commissioning.

This unit includes a magnet (-S) for position sensing with AirTAC CMSE reed and DMSE electronic switches. The external rear screw acts purely as a travel stop for end-position tuning; it does not hold the load without live air pressure. For load-holding without continuous air, consider the SAIL or BSAI series. The extruded aluminum barrel features sensor grooves on both sides, and the mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X400-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke400 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-20S Is Used

tune

Machine Changeover

Dial in the 380-400 mm travel window during product size changes without physically replacing the cylinder or repositioning hard stops.

precision_manufacturing

End-Position Tuning

Fine-tune the retract end position during commissioning to perfect the pickup or placement of delicate components.

settings_input_component

Sensor-Driven Logic

Utilize the integrated magnet with CMSE or DMSE switches to confirm the adjusted end-of-stroke position in automated sequences.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-20S the Right Cylinder?

Choose this adjustable-stroke model when you need precise end-position tuning without adding external stops or swapping cylinders. Conversely, if you need higher force, the 50 mm bore offers 982 N.

Because this 400 mm stroke exceeds the typical unsupported length for a 12 mm rod, an external guide is recommended to prevent excessive side-loading. As a dimensionally interchangeable ISO 15552 cylinder, it matches standard profile footprints using a PT tapered port thread, carbon steel rod, and the -S magnet option.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-20S FAQ

It operates at speeds between 30 and 800 mm/s.

The rear adjuster screw lets you shorten the 400 mm nominal stroke by up to 20 mm, creating a 380-400 mm usable travel window. The adjuster functions as a mechanical stop and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X400-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.