
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X400-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the external adjustment screw at the rear, you can shorten the effective stroke by up to 30mm, creating a precise 370-400mm usable travel window for fine-tuning end positions during commissioning.
This adjustable stopper allows you to dial in the exact end-of-stroke position without swapping out the entire cylinder or adding bulky external stops. The cylinder features variable air cushions at both ends to decelerate the load over a 27mm cushion length, but this mechanism acts strictly as a travel stop and does not hold the load without live air pressure. For position holding, a SAIL or BSAI series cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 370-400mm travel window during product size changeovers on a packaging line without replacing hardware.
Use the rear adjuster to set precise retract positions for testing different material lengths in an automated fixture.
Fine-tune the end-of-stroke position at commissioning to perfect part ejection on a 32mm bore assembly station.
The SAIJ32X400-30 is selected specifically for variable end-stops and machine changeovers, whereas a fixed-stroke SAI cylinder is preferred when the travel distance is permanently locked.
Because the 400mm stroke is substantial for a 32mm bore, the 12mm rod and M10x1.25 thread will experience higher side-load stresses if the load is unsupported. An external guide is highly recommended to prevent rod binding. This cylinder uses a PT tapered port thread, omits a magnet for sensors, and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.9 MPa, the push force increases to 724N.
The rear adjuster screw allows you to shorten the 400mm nominal stroke by up to 30mm, giving a usable travel window of 370-400mm. This stopper only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.