
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X400-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the retract end position during commissioning without adding external stops.
This extruded aluminum profile cylinder uses a standard PT tapered G1/8 port and a 12 mm carbon steel rod. It supports variable air cushions at both ends and operates at speeds between 30-800 mm/s. Mounting options include the standard SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 360-400 mm retract position during product size changes without physically replacing the cylinder or bolting on external stopper blocks.
Dial in the exact 40 mm adjustment range to shift a diverting arm's resting position on a packaging line, accommodating different carton lengths on the fly.
The adjustable stroke is ideal for product changeovers on a line, letting you shift the end stop by up to 40 mm without swapping the cylinder. For load-holding without live air pressure, note that the rear adjuster is a travel stop, not a lock; you would need an external rod lock or a SAIL cylinder instead.
Because this model has a 400 mm stroke, the 12 mm carbon steel rod requires external guiding to prevent excessive side-loading and premature seal wear. This SKU is dimensionally interchangeable per ISO 15552, uses a PT port thread, and ships without a magnet (-S not specified), meaning it will not work with CMSE or DMSE sensors out of the box.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 563N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 400 mm nominal stroke by up to 40 mm, providing a usable travel window of 360-400 mm. The adjuster only sets the travel end and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.