
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X400-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 40 mm adjustment range, creating a usable travel window of 360 to 400 mm for exact end-position tuning.
This variant includes a standard carbon steel rod and a PT tapered port. The integrated magnet (-S) supports position sensing via AirTAC CMSE reed or DMSE electronic switches fitted into the dual-side sensor grooves. The extruded aluminum barrel maintains standard ISO 15552 mounting dimensions while omitting the FB, CA, CB, and CR bracket options in favor of Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 360-400 mm stroke endpoint during machine changeovers without physically swapping the cylinder or repositioning hard stops.
Adjusts the retract position on the fly to accommodate different package lengths on a packaging line, ensuring accurate physical contact.
Provides a mechanical stop to precisely set the extended tooling position during initial machine commissioning, working alongside the air cushion.
Select this 32 mm bore cylinder when an application requires precise mechanical end-stop tuning without adding external stops. Choose the adjustable SAIJ over a fixed SAI when you anticipate product changeovers or need to dial in the 360-400 mm travel window during commissioning.
Because the nominal stroke is 400 mm, the 12 mm diameter rod and M10x1.25 rod thread require external guiding to prevent excessive side-loading on the seals. The rear adjuster acts strictly as a travel stop for deceleration alongside the variable air cushions; it does not hold the load without live air. For load-holding without pneumatic pressure, consider an external rod lock or the related SAIL pneumatic lock cylinder. To match this ISO 15552 replacement exactly, specify the 32 mm bore, 400 mm stroke, 40 mm adjustment, PT port, and the -S magnet.
Quick checklist
At the maximum 1.0 MPa pressure, it achieves 82 kgf.
The rear adjuster screw allows you to shorten the effective travel from the nominal 400 mm down to 360 mm. This mechanical stop fine-tunes the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.