verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-50

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke400 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$88.16 $95.66Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-50

The AirTAC SAIJ32X400-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 350-400mm, letting you dial back the 400mm nominal stroke by up to 50mm during commissioning.

This model uses a 12mm carbon steel rod with an M10x1.25 thread, operating at speeds of 30-800mm/s. It features variable air cushions at both ends and dual-side sensor grooves. Note that the rear adjuster acts purely as a travel stop for end-position tuning, not as a lock to hold loads without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-50 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X400-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke400 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-50

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-50 Is Used

settings_input_component

Machine Setup Changeover

Fine-tune the retract distance by up to 50mm during product line changeovers, ensuring precise positioning without physically swapping cylinders.

precision_manufacturing

Variable End Stops

Dial in the exact travel window between 350 and 400mm to accommodate varying material lengths on a manufacturing line.

tune

Commissioning Calibration

Use the rear stopper screw to safely trim the end-of-stroke position during initial machine calibration, avoiding hard mechanical shocks.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-50 the Right Cylinder?

Choose this 32mm bore adjustable cylinder when you need precise end-position tuning without swapping components or adding external stops. Because the 400mm stroke is relatively long for a 32mm rod, an external guide is recommended to manage side loads and prevent rod deflection.

For ISO 15552 replacement matching, specify bore 32, stroke 400, 50mm adjustment range, PT tapered port threads, and mounting from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). This configuration uses a standard carbon steel rod and no sensor magnet. For load-holding requirements without live air, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-50 FAQ

At the maximum operating pressure of 1.0 MPa, it delivers up to 82kgf.

The rear adjuster screw lets you shorten the 400mm nominal stroke by up to 50mm, creating a 350-400mm usable travel window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X400-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.