
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X400-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 350-400 mm, letting you dial back the nominal 400 mm stroke by up to 50 mm during commissioning without adding external stops. Equipped with a -S magnet, it supports CMSE reed and DMSE electronic sensors housed in the dual-side extruded aluminum barrel grooves.
The rear stopper acts purely as a travel end-stop alongside the variable air cushions; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 350-400 mm travel end-point precisely during machine changeovers, eliminating the need to manufacture and install custom external stopper blocks.
Adjust the actuation length on the fly to accommodate different package sizes on a packaging line without altering the fixed cylinder mounting coordinates.
Dial in the exact retract position during initial equipment commissioning, absorbing mechanical tolerance variations without changing the cylinder itself.
Choose this adjustable-stroke model when a process requires fine end-position tuning across a 350-400 mm window, avoiding the need to physically swap a fixed-stroke SAI cylinder during product changeovers. If your application requires greater thrust, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Because the 400 mm stroke is relatively long for a 32 mm bore, an external guide is recommended to prevent excessive rod side-loading and premature wear. To match this cylinder for an ISO 15552 replacement, specify: 32 mm bore, 400 mm stroke, 50 mm adjustment, PT tapered port thread, carbon steel rod, and a magnet for CMSE / DMSE sensors.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from the 400 mm nominal stroke down to 350 mm. This stopper only sets the travel end and deceleration; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.