
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X400-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the nominal 400 mm travel back by up to 75 mm, creating a 325-400 mm usable window for precise end-position tuning. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
This adjustable-stroke design allows you to fine-tune the retract end-position at commissioning or during product changeover without swapping the cylinder or adding external stops. The rear adjuster acts as a travel stop to set the end position, while the variable air cushions at both ends manage deceleration; neither component will hold a load without live air pressure. It supports a speed range of 30-800 mm/s and uses a PT tapered G1/8 port.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 325 and 400 mm during machine commissioning to perfectly position parts without machining custom spacers.
Quickly adapt automated lines to new package sizes by adjusting the rear stopper screw, reducing downtime when switching product formats.
Fine-tune the end-of-stroke position on new equipment to dial in sensor locations and mechanical stops precisely before full production runs.
An adjustable stroke is ideal for machine setups requiring a variable end-stop, giving you commissioning flexibility that a fixed-stroke SAI cylinder cannot provide. Because the nominal stroke is 400 mm, the 12 mm rod needs external guidance to prevent excessive side-loading and premature seal wear. For load-holding without continuous air pressure, use an external rod lock or pilot-operated check valve, as this cylinder does not hold position unpowered. Replacement requires matching the 32 mm bore, 400 mm stroke, 75 mm adjustment, PT G1/8 port, and mounting from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The rear adjuster screw lets you shorten the 400 mm nominal stroke by up to 75 mm, providing an adjustable travel window from 325 to 400 mm. It acts as a mechanical stop to set the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.