
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X400-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 325-400 mm from its 400 mm nominal stroke. The extruded aluminum barrel features sensor grooves on both sides, and the integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches for precise position feedback.
This model uses a 27 mm variable air cushion at both ends to manage deceleration, but the rear mechanical screw acts purely as a travel stop to fine-tune the end position without holding the load. It supports a speed range of 30-800 mm/s and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) that omits FB, CA, CB, and CR brackets. Standard TPU seals accommodate operating temperatures from -20 to +70 C.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial the stroke back by up to 75 mm to set exact end positions during machine commissioning without replacing the cylinder.
Quickly adjust the usable travel window from 325 to 400 mm to accommodate different product sizes on the same production line.
Pairs the integrated -S magnet with AirTAC CMSE and DMSE switches to confirm exact end-of-travel after mechanical stop adjustments.
The 75 mm adjustment range is ideal for machine setups requiring variable end-stops or product changeovers, allowing you to dial back the stroke without swapping cylinders or adding external stops. For fixed travel needs without commissioning tweaks, a standard SAI cylinder is sufficient.
Because the nominal stroke is 400 mm, the 12 mm rod requires external guidance to prevent excessive side-loading damage. Remember that the rear adjuster and air cushions only set the travel end; they do not hold the load without live air. For true load-holding without pressure, use an SAIL pneumatic lock, a BSAI clamp-lock, or an external pilot-operated check valve. This SAIJ model is dimensionally interchangeable per ISO 15552, uses a PT G1/8 port, and includes the -S magnet for sensors.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from 400 mm down to 325 mm. It sets the end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.