
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X425-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X425-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 415-425 mm usable travel window, allowing you to dial back the 425 mm nominal stroke by up to 10 mm during machine commissioning.
Equipped with a carbon steel rod and an M10x1.25 thread, this unit utilizes a PT tapered port. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. Because the stroke extends past 300 mm, an external guide is recommended to counteract side-load deflection on the unsupported rod.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X425-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 415-425 mm window during machine setup without physically changing the cylinder length.
Quickly adjust the stroke end-position on a packaging line when handling slightly different carton sizes on the fly.
Choose this 32 mm bore when your application requires less force than the 40 mm size (which yields 628 N at 0.5 MPa) but still needs a long reach. The 10 mm adjustment range is ideal for fine-tuning the retract end-position without swapping out the cylinder or adding external stopper blocks. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true load-holding, consider an AirTAC SAIL or BSAI cylinder.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 425 mm stroke, 10 mm adjustment, PT port thread, and mounting interface. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from the 425 mm nominal stroke down to 415 mm. This allows for precise end-position tuning at commissioning without replacing the cylinder, though the adjuster acts only as a stop and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.