
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X425-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X425-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in rear stopper allows you to dial back the 425 mm nominal stroke by up to 100 mm, creating a precise 325-425 mm usable travel window for fine-tuning during commissioning.
This adjustable end-position capability eliminates the need to swap out the entire cylinder or bolt on external stops when product dimensions change. The extruded aluminum barrel includes sensor grooves on both sides, and while this unit omits a magnet, adding the -S option enables compatibility with AirTAC CMSE reed and DMSE electronic solid-state switches.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X425-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 325 mm and 425 mm to accommodate different material lengths without changing the cylinder.
Quickly fine-tune the end-of-stroke position during product format changes, reducing setup downtime on automated lines.
Precisely set the stopping point for pressing or locating tasks during initial commissioning to avoid overtravel damage.
The 100 mm adjustment window is ideal for machinery that frequently handles varying product sizes, allowing operators to set variable end stops on the fly instead of machining new hard stops. Because the 425 mm stroke is relatively long for a 32 mm rod, an external guide is recommended to prevent excessive side-loading and premature seal wear.
When specifying a replacement, verify the 425 mm stroke, 100 mm adjustment range, PT G1/8 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the rear adjuster functions strictly as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster acts as an external stopper that lets you shorten the effective stroke from its 425 mm nominal length down to as little as 325 mm. It decelerates the travel end but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.