
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X425-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X425-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 405 to 425 mm, allowing you to dial in the exact retract position during commissioning. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
Equipped with a 12 mm carbon steel rod and M10x1.25 rod thread, this unit handles standard operational loads. It uses PT tapered port threads and features adjustable air cushions at both ends to manage impact. The rear stopper mechanism sets the end-of-travel position but does not function as a lock, meaning live air pressure is required to hold the load in place.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X425-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 405-425 mm retract distance during line changeovers to accommodate different product sizes without swapping cylinders.
Dial in the exact end-of-stroke position during initial commissioning to perfect timing and avoid mechanical interference.
Adjust the stroke length on the fly to meet varying package dimensions on a sorting conveyor line.
Select this 32 mm bore model when your application requires precise retract positioning within a 405-425 mm window without adding external stops. If your setup needs higher force, stepping up to the 40 mm bore increases thrust to 628 N at 0.5 MPa. Because this is a 425 mm stroke, the 12 mm rod will experience leverage over a long unsupported distance; an external guide is recommended to prevent side-load damage.
This adjustable-stroke design is chosen over a fixed SAI cylinder when machine setups require frequent product changeovers. For exact ISO 15552 interchangeability, match the 32 mm bore, 425 mm stroke, 20 mm adjustment, PT port thread, and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting set. Since no magnet is specified, position detection requires external sensors or a model with the -S magnet option for CMSE reed or DMSE electronic switches.
Quick checklist
The rear adjuster screw allows you to shorten the 425 mm nominal stroke by up to 20 mm, creating a 405-425 mm usable travel window. The adjuster acts as a mechanical stop to set the position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.