
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X425-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X425-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear mechanical stroke adjuster. It provides a usable travel window of 395 to 425 mm, allowing you to trim the retract end-position by up to 30 mm during commissioning without adding external stops.
This variant includes a standard carbon steel piston rod and a magnetic piston for position detection. The extruded aluminum barrel features sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE solid-state switches. It uses PT G1/8 ports and relies on a 12 mm rod with an M10x1.25 thread, which handles moderate side loads well, though a 425 mm stroke still benefits from an external guide. The mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X425-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 395 to 425 mm retract position during machine commissioning to perfectly align product locators without swapping cylinders.
Quickly adapt the end-stop by up to 30 mm on a packaging line when running slightly shorter product lengths, minimizing downtime between batches.
An adjustable stroke is selected over a fixed SAI cylinder when you need fine end-position tuning at commissioning or product changeover. The rear adjuster acts purely as a travel stop and does not hold the load without live air—use a SAIL or BSAI cylinder for load-holding without pressure. As a dimensionally interchangeable ISO 15552 cylinder, match the 32 mm bore, 425 mm stroke, 30 mm adjustment, PT G1/8 port, and -S magnet for a direct replacement.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The nominal 425 mm stroke can be mechanically shortened by up to 30 mm via a rear adjusting screw, giving an effective travel window of 395 to 425 mm. This stopper fine-tunes the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.