
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X425-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X425-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 425 mm stroke that can be fine-tuned backward by up to 40 mm, yielding a usable travel window of 385 to 425 mm. This built-in adjustability allows you to dial in the exact retract position at commissioning without swapping hardware.
The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement. Because this unit lacks a magnet, you would need to specify the -S option to use AirTAC CMSE reed or DMSE electronic sensors. The standard carbon steel rod and M10x1.25 thread are robust, but with a 425 mm stroke, an external guide is recommended to prevent excessive side loading on the rod seals.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X425-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly shift the retract position by up to 40 mm during format changes on packaging lines, avoiding mechanical teardown.
Fine-tune the 425 mm travel window during machine commissioning to perfectly time the pickup or release of delicate parts.
Provides an adjustable 385-425 mm stroke for diverters or gates that must accommodate different package sizes on the fly.
The adjustable 385-425 mm window is perfect for product changeovers on a line, allowing you to shift the retract end-stop without adding external stops or buying a different cylinder. For fixed-travel needs where no end-tuning is required, a standard SAI cylinder is a simpler choice.
When matching ISO 15552 dimensions for a replacement, verify the 425 mm stroke, 40 mm adjustment range, PT tapered port thread, and your mounting choice from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-pilot load holding, consider the SAIL or BSAI series.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.
A rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from its 425 mm nominal length down to 385 mm. It only sets the travel end and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.