
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X425-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X425-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 375 to 425 mm, enabling precise end-position tuning at commissioning without external stops.
This 32 mm bore version features a 12 mm carbon steel rod and M10x1.25 thread. It includes variable air cushions at both ends to manage impact over the 425 mm travel. The extruded aluminum barrel integrates sensor grooves on both sides for CMSE or DMSE switches, though this non-magnet version requires an -S suffix for sensor activation.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X425-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 375-425 mm travel window during product size transitions to set new end positions without swapping cylinders.
Use the 50 mm rear adjustment range to fine-tune the retract position precisely during initial machine commissioning.
If your setup requires less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore yields 628 N. The adjustable stroke is selected over a fixed SAI cylinder when you need variable end-stops for product changeovers.
For a 425 mm stroke, the 12 mm rod requires external guidance to prevent side-load damage, as the rear adjuster acts only as a travel stop and the air cushions manage deceleration, neither holding the load without live air. For load-holding without pressure, consider the SAIL or BSAI series. This model uses PT tapered ports and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
The rear adjuster screw allows you to shorten the nominal 425 mm stroke by up to 50 mm, creating a usable travel window of 375-425 mm. The adjuster acts as a physical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.