
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X425-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X425-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 425 mm travel that can be dialed back by up to 50 mm, yielding a usable 375-425 mm end-position window for precise commissioning without external stops.
This unit includes a standard magnet for position sensing using CMSE reed or DMSE electronic switches mounted into the dual-side sensor grooves on the extruded aluminum barrel. The rear adjuster acts purely as a travel stop to fine-tune the retract distance; it does not lock or hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X425-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial the stroke back by up to 50 mm during line changeovers to accommodate varying package lengths without swapping hardware.
Fine-tune the retract end-of-stroke at machine commissioning to perfect the seating of delicate components within the 375-425 mm window.
Adjust the physical stopper position on the fly to handle different product widths moving down a conveyor line.
Choose this adjustable model over a fixed-stroke SAI when your application requires variable end-stops or frequent product changeovers that demand slight travel modifications. If your setup needs less push force, dropping down is not an option from 32 mm as it is the smallest bore, but stepping up to a 40 mm bore yields 628 N at 0.5 MPa for heavier demands. Because the 425 mm stroke is relatively long for a 12 mm rod, an external guide rail is recommended to prevent excessive side-loading and rod deflection.
To replace this cylinder, match the 32 mm bore, 425 mm stroke, 50 mm adjustment range, PT tapered port, and the -S magnet option. The SAIJ mounting set is restricted to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. For load-holding without continuous air pressure, select a SAIL or BSAI series cylinder instead of relying on the rear stopper.
Quick checklist
The rear adjusting screw acts as an external stopper that shortens the effective travel. For this model, you can trim the 425 mm nominal stroke back by up to 50 mm, providing an adjustable 375-425 mm travel window.
At the maximum 1.0 MPa pressure, the push force reaches 801 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.