
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X425-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X425-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 425 mm travel that can be fine-tuned backward by up to 75 mm, creating a precise 350-425 mm usable window.
This adjustable stopper allows you to dial in the exact end position during commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later. It uses the standard SAIJ mounting set, omitting FB, CA, CB, and CR brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X425-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial the rear adjuster to shorten the stroke by up to 75 mm when switching to a smaller product format on the line.
Fine-tune the final retract position during machine commissioning without fabricating custom external spacers.
Adjust the travel window between 350 and 425 mm to handle varying package sizes on a sorting conveyor.
If your application requires less force, stepping down is not an option below 32 mm, but stepping up to a 40 mm bore yields 628 N. The 75 mm adjustment range is ideal for product changeovers, letting you shorten the stroke by 75 mm without swapping the cylinder. For load-holding without live air pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is only a travel stop.
With a 425 mm stroke on a 12 mm rod, the extended piston is susceptible to side loads. Always use an external guide rail to prevent rod binding. To replace an ISO 15552 cylinder, match the 32 mm bore, 425 mm stroke, 75 mm adjust, PT port, and your required mounting bracket from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 set.
Quick checklist
At 0.9 MPa, the push force reaches 724 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 425 mm down to 350 mm. It only sets the travel end and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.