
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X45-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X45-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 45 mm stroke that can be fine-tuned down by up to 10 mm, giving operators a precise 35-45 mm usable travel window during commissioning.
This variant includes a built-in magnet for position sensing and uses a standard carbon steel piston rod with an M10x1.25 thread. The extruded aluminum barrel features sensor grooves on both sides, allowing you to directly mount AirTAC CMSE reed or DMSE electronic solid-state switches exactly where your cycle requires them.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X45-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 35-45 mm insertion depth for delicate electronic connectors or pins during initial machine setup, preventing overtravel damage without swapping physical hard stops.
Quickly adjust the rear stopper by a few millimeters to accommodate slightly different product heights on a packaging line, minimizing downtime between production runs.
Select this 32 mm bore when an application demands exact end-position tuning without adding external stops; if you need slightly less force, stepping down is not an option as 32 mm is the smallest SAIJ size, but stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. The adjustable rear screw acts strictly as a travel stop to set deceleration and end limits, not as a locking device, so it will not hold a load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI cylinder series.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 45 mm nominal stroke, 10 mm adjustment range, PT tapered port thread, and the -S magnet option. Mounting choices are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets found on other lines.
Quick checklist
The rear adjuster screw allows you to shorten the 45 mm nominal stroke by up to 10 mm, creating a usable travel window of 35 to 45 mm. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.