
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X45-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X45-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 25-45 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position monitoring.
This model allows you to fine-tune the retract end position at commissioning without swapping hardware. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear screw acts as a travel stop for deceleration rather than a load lock, so live air is required to maintain position.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X45-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-of-stroke position during initial commissioning without machining external stopper blocks.
Quickly adapt the 25-45 mm travel distance on automated lines handling varying component sizes.
Fine-tune the retract stroke by up to 20 mm to compensate for mechanical wear or sensor drift over time.
Choose this 32 mm bore if your application requires precise positioning within a short 25-45 mm window. The adjustable stroke is ideal for product changeovers where a fixed-stroke SAI cylinder would require external stops.
When replacing an ISO 15552 cylinder, match the 45 mm stroke, 20 mm adjustment range, PT G1/8 port, and the appropriate mounting bracket. Because this unit lacks a magnet, you cannot use AirTAC CMSE or DMSE sensors without specifying the -S option.
Quick checklist
The maximum allowable operating pressure is 1.0 MPa.
A rear adjusting screw lets you shorten the nominal 45 mm stroke by up to 20 mm, creating a usable travel window of 25 to 45 mm. This stopper sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.