
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X45-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X45-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32mm bore and a 45mm nominal stroke, but the integrated stopper screw lets you dial the effective travel back by up to 30mm. This creates a highly versatile 15-45mm usable stroke window, allowing you to fine-tune the retract end-position at commissioning without swapping out the cylinder or adding external stops.
In this magnetic configuration (-S), the extruded aluminum barrel works seamlessly with AirTAC CMSE reed and DMSE electronic sensors housed in the dual-side sensor grooves. The rear adjuster acts purely as a travel stop to set the end position, so it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X45-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Perfect for dialing in the exact 15-45mm travel distance needed for delicate clamping or sensing positions during machine commissioning.
Quickly adjust the retract stopper on the line to accommodate slightly different product sizes without changing the pneumatic cylinder.
The SAIJ series is selected over a fixed-stroke SAI cylinder when product changeovers demand a variable end-stop.
To match this exact replacement, specify: 32mm bore, 45mm stroke, 30mm adjustment, PT port thread, and the -S magnet option. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, omitting FB, CA, CB, and CR. Note that for load-holding without live air pressure, you must look to the SAIL or BSAI series, as the SAIJ adjuster is not a lock.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective travel by up to 30mm. This gives the SAIJ32X45-30-S a usable stroke window of 15-45mm, letting you set the exact end-position mechanically without external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.