
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X45-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X45-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 5 to 45 mm, allowing you to dial back the nominal 45 mm stroke by up to 40 mm during commissioning.
This model incorporates a carbon steel piston rod with an M10x1.25 thread, paired with PT tapered port threads (G1/8 air supply). The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X45-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 5 and 45 mm during machine commissioning without swapping out the entire cylinder body.
Quickly adjust the stroke length on packaging lines when handling slightly different package sizes on the same conveyor setup.
Apply up to 402 N of clamping force at 0.5 MPa while fine-tuning the final position to avoid crushing delicate workpieces.
Choose this 32 mm bore when you need precise 5 to 45 mm travel tuning without adding external stops. Conversely, if you need less force, a smaller bore might be more efficient.
Because the stroke is under 300 mm, side-load stress is minimal, but an external guide is still recommended for heavy lateral loads. For load-holding without continuous air pressure, this standard cylinder is insufficient; consider the SAIL or BSAI series instead. To replace an ISO 15552 cylinder, match the 32 mm bore, 45 mm stroke, 40 mm adjustment, PT ports, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 40 mm. This provides a usable travel window of 5 to 45 mm, allowing precise end-position tuning at commissioning without changing the cylinder.
The maximum thrust is 82 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.