
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X45-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X45-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables precise position detection using AirTAC CMSE reed or DMSE electronic solid-state sensors housed within the dual-side sensor grooves.
With a 45mm nominal stroke and a 40mm adjustment range, this model provides a highly versatile 5-45mm usable travel window. This wide tuning capacity is ideal for short-stroke applications requiring exact end-position calibration during commissioning or product changeover, eliminating the need to physically swap cylinders or add external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X45-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Perfect for dialing in precise clamping or ejection distances on small parts, using the 40mm adjuster to fine-tune the 5-45mm travel window without changing hardware.
Enables rapid product size adjustments on packaging lines, allowing operators to set new retract endpoints via the rear screw rather than repositioning the entire cylinder.
Pairs the -S magnet with CMSE or DMSE switches in the aluminum profile grooves to confirm exact adjustable end-stroke positions in automated assembly checks.
The carbon steel rod with an M10x1.25 thread handles standard loads well, though the adjuster acts purely as a travel stop and does not hold the load without live air; for dead-air load holding, consider an external rod lock or the SAIL series.
This cylinder is dimensionally interchangeable per ISO 15552 and uses a PT tapered port thread. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. The standard variable air cushions at both ends help manage deceleration across its 30-800 mm/s speed range.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to trim the effective travel back by up to 40mm, creating a usable stroke window of 5 to 45mm. This stopper sets the retract end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.