
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X450-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X450-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 450 mm nominal stroke that can be dialed back by up to 100 mm, yielding a 350-450 mm usable travel window for precise retract-end tuning. The extruded aluminum barrel features sensor grooves on both sides, and this -S variant includes a magnet for CMSE reed or DMSE solid-state switches.
This model uses a 12 mm carbon steel piston rod with an M10x1.25 thread and a G1/8 port. Because the 450 mm stroke is relatively long for a 32 mm bore, the rod and thread size means it handles moderate side loads but still requires an external guide to prevent rod bending. The rear adjuster acts purely as a mechanical stop for deceleration and positioning; it does not hold the load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 350-450 mm retract position during machine commissioning to accommodate multiple product sizes without mechanical rebuilds.
Adjust the stroke on the fly during line changeovers, using the rear stopper to set new reject or transfer points for different package lengths.
Select the SAIJ32X450-100-S when your machine setup requires variable retract end-stops or fine-tuning during product changeovers without swapping cylinders or adding external stopper blocks. Keep in mind the 450 mm stroke length necessitates an external guide to support the load and prevent side-load damage to the rod.
This configuration features a PT tapered port, a standard carbon steel rod, and an -S magnet for position sensing. It shares the exact ISO 15552 mounting interface dimensions of standard cylinders but uses a reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR brackets. The standard variable air cushions at both ends help manage kinetic energy across the 30-800 mm/s speed range.
Quick checklist
The rear adjuster screw acts as a mechanical stop that shortens the effective stroke. For this model, you can trim the 450 mm nominal stroke back by up to 100 mm, creating a usable travel window of 350-450 mm to fine-tune the end position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.