
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X450-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X450-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 440 to 450 mm, allowing you to dial back the position by up to 10 mm during commissioning without swapping the unit. Equipped with a -S magnet, it supports CMSE reed and DMSE electronic sensors housed in the dual-sided extruded aluminum barrel grooves.
It features a 12 mm carbon steel rod with an M10x1.25 thread and G1/8 PT ports. Because the 450 mm stroke is substantial for this bore size, the rear adjuster acts purely as a travel stop to decelerate the load, not as a lock; for load-holding without live air pressure, consider an external rod lock or the SAIL series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 440-450 mm travel window during product size changes on a packaging line without physically replacing the cylinder or adding external stopper blocks.
Dial in the exact retract position by up to 10 mm during commissioning to perfect the tooling alignment on automated assembly equipment.
Adjust the stroke end-point on the fly to synchronize a diverter arm's reach with varying product profiles on a material handling conveyor.
Choose this 32 mm bore adjustable cylinder when your application requires exact end-position tuning at machine setup or product changeover, avoiding the need to bolt on external stops.
The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles. Given the 450 mm stroke length, the 12 mm rod is susceptible to side-loading; an external guide is strongly recommended to prevent premature seal wear. To replace an ISO 15552 cylinder, match the 32 mm bore, 450 mm stroke, 10 mm adjustment, G1/8 PT ports, and -S magnet.
Quick checklist
The rear adjuster screw allows you to shorten the effective travel from the nominal 450 mm down to 440 mm. This creates a 10 mm tuning window for precise end-position setup without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.