verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X450-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke450 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$92.09 $99.59Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-20

The AirTAC SAIJ32X450-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 450 mm stroke with a 20 mm adjustment range, yielding a usable travel window of 430 to 450 mm.

This model allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop and works alongside variable air cushions at both ends to control deceleration. It does not hold the load without live air pressure; for load-holding requirements, consider the SAIL or BSAI series.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X450-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke450 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×450Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-20 Is Used

settings_input_component

Machine Setup Changeover

Dial in the 430-450 mm travel window during product size changes without physically swapping the cylinder or repositioning hard stops.

conveyor_belt

Variable End-Stop Diverter

Fine-tune the retract position on a sorting line to accommodate different package lengths on the fly.

precision_manufacturing

Commissioning Fine-Tune

Adjust the rear screw to perfectly sync the 450 mm stroke with machine timing during initial startup.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-20 the Right Cylinder?

If your setup needs less force, a smaller option lacks this bore's adjustability, but if you need significantly more thrust, stepping up to the 40 mm bore yields 628 N. The adjustable stroke is ideal for product changeovers on a line, whereas a fixed SAI cylinder suits static end positions. Because the stroke is 450 mm, the 12 mm carbon steel rod needs an external guide to prevent excessive side-loading and premature seal wear.

To match this ISO 15552 interchangeable cylinder, specify the 32 mm bore, 450 mm stroke, 20 mm adjustment, PT tapered port thread, and standard carbon steel rod. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts. Since no magnet is specified, it will not work with CMSE or DMSE sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-20 FAQ

At a maximum 1.0 MPa, it delivers up to 82 kgf.

The rear adjuster screw lets you shorten the effective travel from the nominal 450 mm down to 430 mm, creating a 430-450 mm window. It functions as a mechanical stop for end-position tuning and is not a locking device.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X450-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.