
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X450-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X450-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 450 mm stroke that can be fine-tuned down by up to 30 mm, creating a precise 420-450 mm usable travel window.
This extruded aluminum profile cylinder features a 12 mm carbon steel rod and a PT G1/8 port. The rear adjuster acts purely as a mechanical stop to set the retraction end position during commissioning without needing external stops. It supports variable air cushions at both ends and operates at speeds between 30 and 800 mm/s.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 420-450 mm retract distance during product size changes without physically swapping cylinders or adding external shims.
Fine-tune the final retraction point at commissioning using the rear stopper to perfectly align lightweight 402 N tooling components.
Adjust the stroke window on the fly for sorting or diverting operations that require slightly different travel distances per batch.
If your setup demands greater thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The adjustable stroke is ideal for product changeovers, allowing you to dial in the exact retract distance without swapping the cylinder. For a fixed end-stop, the standard SAI series is sufficient.
Because this model features a 450 mm stroke, the 12 mm carbon steel rod will experience leverage forces if the load is unsupported; an external guide is recommended to prevent side-loading damage. When specifying a replacement, match the 32 mm bore, 450 mm stroke, 30 mm adjustment, PT G1/8 port, and the desired mounting set (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the rear adjuster is a travel stop, not a lock; for load-holding without live air, consider the SAIL or BSAI series.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear mechanical stopper allows you to shorten the effective stroke by up to 30 mm from the 450 mm nominal length, providing a usable travel window of 420-450 mm. It acts as a physical stop to set the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.