
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X450-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X450-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 40 mm adjustment range, allowing you to fine-tune the usable travel window between 410 and 450 mm during commissioning without adding external stops.
This model uses a G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. Because the 450 mm stroke is relatively long for this bore size, the 12 mm rod should be supported by an external guide to manage side loads. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic sensors if a magnet is added later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 410-450 mm travel window during product size transitions to set new end positions quickly without swapping cylinders.
Use the 40 mm rear stopper to fine-tune the retract stroke during initial commissioning, avoiding the need for external mechanical stops.
Accommodate varying package lengths on a conveyor line by adjusting the retract distance on the fly within the 40 mm range.
Choose this 32 mm bore adjustable-stroke cylinder when your machine setup requires variable end-stops or product-size changeovers. If your application needs more power, stepping up to the 40 mm bore increases the 0.5 MPa push force to 628 N. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR.
The rear adjuster screw acts strictly as a travel stop to set deceleration and end positions, not as a locking device. The cylinder will not hold a load without live air pressure; for true load-holding, consider the SAIL or BSAI series, or use an external pilot-operated check valve. To match this ISO 15552 interchangeable cylinder, specify the 32 mm bore, 450 mm stroke, 40 mm adjustment, PT tapered port threads, and no magnet.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster allows you to shorten the 450 mm nominal stroke by up to 40 mm, creating a usable travel window of 410 to 450 mm. It acts as a stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.