
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X450-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X450-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 450 mm stroke with a 40 mm adjustment range, creating a usable travel window of 410 to 450 mm for precise end-position tuning at commissioning.
This model utilizes a PT G1/8 port and operates at speeds between 30 and 800 mm/s. The extruded aluminum barrel features sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts strictly as a travel stop to dial in the retract position without adding external stops, while the shared air cushions manage end-of-stroke deceleration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 410-450 mm travel window during line size conversions without physically replacing the cylinder or adding external mechanical stops.
Fine-tune the retract end position during machine commissioning to perfect part ejection or clamping depth on the fly.
Adjust the retract distance on automated assembly lines to accommodate different part heights and process variations.
The adjustable rear stopper allows you to fine-tune the 410-450 mm travel window without swapping the cylinder, unlike a fixed-stroke SAI model.
Because the 450 mm stroke is relatively long for this bore size, the 12 mm diameter carbon steel rod and M10x1.25 rod thread will be subjected to higher side loads; an external guide is recommended to prevent binding. As an ISO 15552 dimensionally interchangeable cylinder, it uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR mounts. Note that the rear adjuster and air cushions only set the travel end; they do not hold the load without live air pressure. For dead-load holding, consider an external rod lock or the SAIL and BSAI series.
Quick checklist
If your application requires more thrust, stepping up to a 40 mm bore increases the push force to 628 N at the same pressure.
The rear external stopper allows you to shorten the effective travel from the nominal 450 mm down to 410 mm, giving a 410-450 mm adjustable window. This adjuster acts as a mechanical stop to set the retract end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.