
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X450-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X450-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 450 mm travel that can be fine-tuned down by up to 50 mm, giving you a usable 400-450 mm end-position window.
This model uses a carbon steel piston rod with an M10x1.25 thread, paired with PT tapered port threads (G1/8). Because the 450 mm stroke is long relative to the 12 mm rod diameter, external guide rails are recommended to prevent side-load damage. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end-position by up to 50 mm during line changeovers without physically replacing the cylinder or adding external stopper blocks.
Adjust the 400-450 mm travel window on the fly to accommodate different package sizes moving down a conveyor system.
Dial in the exact retracted position during initial commissioning to perfectly time a secondary pick-and-place operation.
Choose this 32 mm bore adjustable cylinder when you need to dial in a specific end-of-stroke position during machine commissioning or product changeover, rather than swapping out a fixed-stroke SAI cylinder. The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure; for true load-holding, consider an AirTAC SAIL or BSAI cylinder.
To match this ISO 15552 replacement exactly, specify a 32 mm bore, 450 mm nominal stroke, 50 mm adjustment range, PT port threads, and the standard carbon steel rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Given the 450 mm stroke, always support the load with an external guide to protect the piston rod.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 450 mm nominal stroke by up to 50 mm, creating a 400-450 mm usable travel window. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.