
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X450-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X450-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 450 mm travel that can be fine-tuned down by up to 75 mm, giving operators a precise 375-450 mm usable stroke window during commissioning.
This extruded aluminum profile cylinder features a 12 mm carbon steel piston rod and an M10x1.25 thread. It includes variable air cushions at both ends to manage deceleration across its 30-800 mm/s speed range. The rear stopper sets the retract end position, but it is a travel stop rather than a load lock, so it will not hold a load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 375-450 mm travel window during product size changes without physically swapping the cylinder or reworking fixed stop blocks.
Fine-tune the retract end position at commissioning using the rear screw, ensuring precise alignment for lighter-duty 402 N assembly tasks.
Adjust the effective stroke on the fly for diverter gates or lightweight pushers that handle multiple package sizes on a single line.
If your setup demands greater thrust, stepping up to the 40 mm bore increases that output to 628 N. The SAIJ32X450-75 is selected specifically when you need a 375-450 mm adjustable travel window to dial in exact end positions without adding external stops or swapping cylinders. For an ISO 15552 replacement, match the 32 mm bore, 450 mm stroke, 75 mm adjustment, PT tapered port thread, and standard carbon steel rod.
Because this cylinder features a 450 mm stroke with a relatively small 12 mm rod, it is susceptible to side loading. For any stroke of 300 mm or more, you must use an external guide to prevent rod binding and premature seal wear. Note that the rear adjuster and air cushions only manage travel ends; for true load-holding without live air, consider an external rod lock or pilot-operated check valve.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 75 mm. This creates a usable travel window of 375-450 mm, letting you fine-tune the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.