
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X450-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X450-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 450 mm nominal travel by up to 75 mm. This creates a usable 375-450 mm end-position window, giving you precise tuning flexibility during machine commissioning or product changeovers without needing to swap out the entire actuator.
Because the stroke extends to 450 mm on a 32 mm bore, an external guide is highly recommended to manage side loads and prevent rod bending, as the 12 mm rod has limited lateral load capacity. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant contains a magnet for position detection using AirTAC CMSE reed or DMSE electronic solid-state switches. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X450-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 375 and 450 mm during machine setup to accommodate different material lengths without adding external stopper blocks.
Quickly adjust the rear mechanical stop on a packaging line when switching to a new carton size, saving downtime on physical actuator swaps.
Utilize the 450 mm travel for extending and retracting lightweight probes or gates, relying on the integrated magnet for precise DMSE electronic sensor feedback.
Select this 32 mm bore actuator when an application requires a long 450 mm reach but still demands exact end-position tuning within a 375-450 mm window. Choose the adjustable SAIJ over a fixed-stroke SAI when you need on-the-fly mechanical stop adjustments for varying product sizes. For load-holding without continuous air pressure, this cylinder is insufficient; you should explore an SAIL air-released lock, a BSAI clamp-lock, or an external rod lock.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 450 mm nominal stroke, the 75 mm adjustment range, the PT tapered port thread, and the -S magnet option. Mounting choices are restricted to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. The FB, CA, CB, and CR mounts are omitted from this series.
Quick checklist
At its maximum 1.0 MPa pressure, it achieves 82 kgf.
The rear adjusting screw acts as a mechanical stop that shortens the effective travel. For this model, it creates an adjustable window between 375 mm and 450 mm, allowing you to fine-tune the retract position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.