
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a nominal 475 mm stroke and a 10 mm adjustment range, it provides a usable travel window of 465 to 475 mm. This built-in stopper allows you to fine-tune the retract end position at commissioning without adding external stops or swapping the cylinder.
Designed for precision setups, this 32 mm bore model uses a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a travel stop to set deceleration and end-position; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end-position by up to 10 mm during commissioning to perfectly align tooling without machining external stopper blocks.
Quickly adapt the 465-475 mm travel window on a packaging line when product sizes change, minimizing downtime between production runs.
Use the rear adjusting screw to dial in the exact stroke limit for delicate positioning tasks that cannot rely on a fixed 475 mm stroke.
Choose this adjustable-stroke model when a standard 475 mm fixed-stroke SAI cylinder lacks the end-position flexibility your machine setup requires. The 10 mm adjustment window is ideal for product changeovers or dialing in exact retract distances. If your application needs less push force, stepping down is not an option within the 32 mm bore, but stepping up to a 40 mm bore yields 628N at 0.5 MPa.
Because the stroke is 475 mm, the 12 mm rod requires an external guide to prevent excessive side-load and buckling. This cylinder is dimensionally interchangeable per ISO 15552. To match this exact configuration: 32 mm bore, 475 mm stroke, 10 mm adjustment, PT tapered port thread, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting, and no magnet (-S not specified).
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from 475 mm down to a minimum of 465 mm. It sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.