
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 100 mm. This yields a usable window of 375-475 mm, enabling precise end-position tuning at commissioning without swapping the barrel or adding external stops.
Because the adjustment amount acts as a travel stop rather than a lock, the cylinder cannot hold a load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments. The PT G1/8 port and 27 mm cushion ensure reliable deceleration across the 30-800 mm/s speed range.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 375-475 mm end-stop during commissioning to perfect the stroke length without machining external spacers.
Quickly adjust the retract position on a packaging line to handle different carton sizes on the fly.
Fine-tune the travel window on R&D test stands where the exact end-of-stroke contact point shifts between iterations.
The adjustable stroke is selected over a fixed SAI cylinder when machine setups require variable end-stops or frequent product changeovers. For strokes of 475 mm, the 12 mm rod needs careful alignment; while the rod thread handles moderate side loads, an external guide rail is recommended for long unsupported travel.
If load-holding without live air is required, this adjuster will not suffice; consider an external pilot-operated check valve or AirTAC SAIL and BSAI locking cylinders. Dimensionally interchangeable per ISO 15552, this configuration uses a PT tapered port, carbon steel rod, and no magnet.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop that shortens the 475 mm nominal stroke by up to 100 mm, giving an effective travel window of 375-475 mm. It only sets the end position and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.