
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for CMSE reed and DMSE electronic sensors.
This 32mm bore unit uses a PT tapered G1/8 port and a 12mm carbon steel rod with an M10x1.25 thread. The rear adjuster acts purely as a mechanical stop to set the retract end position during commissioning; it is not a lock and cannot hold a load without live air. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 375-475mm travel window during product size changes without physically replacing the actuator or bolting on external stop blocks.
Use the 100mm rear adjuster screw to precisely set the retract end-of-stroke position during initial machine commissioning.
Accommodate varying package lengths on a conveyor sorting line by adjusting the retract distance on the fly.
Choose this adjustable model when you need to fine-tune the end position at commissioning or during product changeovers without swapping the cylinder or adding external stops. Because the 475mm stroke exceeds 300mm, the 12mm rod is susceptible to side-loading; always use an external guide rail to prevent premature seal wear.
This SAIJ32X475-100-S is dimensionally interchangeable per ISO 15552. Configuration: 32mm bore, 475mm stroke, 100mm adjustment, PT G1/8 port, carbon steel rod, -S magnet, and a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke by up to 100mm, creating a usable travel window of 375 to 475mm. It only sets the travel end and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.