
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The extruded aluminum barrel features sensor grooves on both sides, and the integrated -S magnet pairs directly with AirTAC CMSE reed and DMSE electronic solid-state switches.
Because the stroke extends to 475 mm on a 12 mm rod, external guiding is recommended to prevent excessive side-loading on the piston. This model uses a PT tapered port thread and omits the FB, CA, CB, and CR mounting options, supporting only the Basic, FA, LB, TC, FTC, TCM1, and TCM2 ISO 15552 interface set.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 465-475 mm retract end position during product size changes without installing external stopper blocks.
Dial in the exact 10 mm adjustment window at commissioning to perfect seating pressure against a workpiece.
Adjust the stroke length on the fly to sync diverter arms with varying package sizes on a packaging line.
If your setup demands higher thrust, consider moving to the 40 mm bore which provides 628N. The rear adjuster acts strictly as a travel stop and does not hold the load without live air; for true pneumatic locking without pressure, explore the SAIL or BSAI series.
For an exact ISO 15552 replacement match, verify a 32 mm bore, 475 mm nominal stroke, 10 mm adjustment range, PT port thread, and the required mounting bracket from the reduced SAIJ set. Given the 475 mm stroke, ensure your mounting configuration includes an external guide to support the load and protect the rod.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the effective travel from the 475 mm nominal stroke down to 465 mm, creating a 465-475 mm usable window. It functions as a mechanical stop for end-position tuning and is not a locking device.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.