
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you can trim the effective travel within a 455-475mm window, which is ideal for fine-tuning end positions during commissioning without swapping hardware.
This 32mm bore actuator uses a PT G1/8 port and relies on variable air cushions at both ends to decelerate the load. The adjuster acts purely as a mechanical stop and does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is added later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 455-475mm travel window during product size changes to set new end stops quickly without replacing the actuator.
Fine-tune the retract position on packaging lines to accommodate varying carton lengths accurately.
Use the rear adjuster at commissioning to precisely set the tooling contact point without adding external mechanical stops.
The adjustable rear stopper is perfect for product-size changeovers on a line, offering flexibility that a fixed-stroke SAI cylinder cannot match. When replacing an ISO 15552 cylinder, match the 32mm bore, 475mm stroke, PT G1/8 port, and mounting style.
Because the stroke is 475mm, the 12mm rod will experience leverage forces under side loading. An external guide is recommended to prevent rod bending and premature seal wear. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. The standard speed range is 30-800 mm/s.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the nominal 475mm stroke by up to 20mm. This creates a usable travel window of 455-475mm for fine-tuning the retract end position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.