
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window between 455 and 475 mm without adding external stops. The extruded aluminum barrel integrates sensor grooves on both sides, and the -S magnet enables precise position detection with AirTAC CMSE reed or DMSE solid-state switches.
Because the rear adjuster acts purely as a mechanical stop to set the retract end-position, it does not hold the load dynamically without live air pressure. For load-holding requirements without continuous air, a SAIL pneumatic lock or BSAI clamp-lock cylinder is required. This 32 mm bore utilizes a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position within the 455-475 mm window when switching a production line to a different product size.
Fine-tune the retract stop at commissioning without physically swapping the cylinder or machining custom spacers.
Set precise mechanical limits for assembly stations that need minor travel adjustments between batches.
The adjustable stroke is ideal for commissioning fine-tune adjustments on the fly, whereas a fixed-stroke SAI cylinder locks you into a single exact dimension.
When replacing this cylinder under ISO 15552 interchangeability, match the 32 mm bore, 475 mm stroke, 20 mm adjustment range, G1/8 PT tapered ports, and the -S magnet. Since the 475 mm stroke is relatively long for a 12 mm rod, it is highly recommended to use an external guide to prevent excessive side-loading and premature seal wear.
Quick checklist
The external rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective stroke by up to 20 mm. This provides a usable travel window of 455 to 475 mm. It only sets the end-position and does not lock the load without live air pressure.
It operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.