
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 445 to 475 mm. The integrated magnet (-S) enables direct mounting of CMSE reed and DMSE electronic sensors along the dual-side barrel grooves.
This 32mm bore variant features a 12mm carbon steel rod with an M10x1.25 thread, offering moderate side-load capacity, though the 475mm length still necessitates an external guide for heavy loads. The rear stopper mechanism allows precise end-position tuning during commissioning without adding external physical stops, acting purely as a travel deceleration point rather than a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract stop from 445 to 475mm during product size transitions without physically swapping cylinders or adding external stopper blocks.
Fine-tune the exact end-of-stroke position during initial commissioning to perfect timing and avoid mechanical hard crashes.
Select this adjustable model over a fixed-stroke SAI when a machine requires fine-tuning of the retract end position during setup or product changeover. If an application demands greater thrust, stepping up to a 40mm bore increases push force to 879N at 0.5 MPa. To match this exact ISO 15552 replacement, specify: 32mm bore, 475mm nominal stroke, 30mm adjustment range, PT tapered port thread, and the -S magnet option. Because the stroke is 475mm, an external guide rail is strongly recommended to prevent rod binding under side loads.
The rear adjuster and variable air cushions only set the travel end and decelerate the piston; they do not hold the load without live air pressure. For true fail-safe load holding, consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead of relying on the standard SAIJ adjuster.
Quick checklist
The -30 code indicates the rear adjuster can shorten the nominal 475mm stroke by up to 30mm, giving an effective travel window of 445 to 475mm. The rear screw acts as a physical stop to set the exact end position without swapping the cylinder.
It operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.