
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 435-475 mm usable travel window, allowing you to dial back the 475 mm nominal stroke by up to 40 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Because the 475 mm stroke is relatively long for a 12 mm rod, an external guide is recommended to prevent side-load wear. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract position by up to 40 mm during machine setup without adding external stopper blocks.
Quickly adapt the 475 mm travel window for varying product lengths on a packaging line.
Handles 402 N loads at 0.5 MPa for precise, low-force component placement.
The 40 mm adjustment range is ideal for product changeovers where the exact end-position varies, avoiding the need to physically swap a fixed-stroke SAI cylinder. To replace an ISO 15552 cylinder, match the 475 mm stroke, PT G1/8 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting. No magnet is specified, so CMSE or DMSE sensors cannot be used without adding the -S option. For load-holding without air, select SAIL or BSAI instead.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from 475 mm down to 435 mm. It acts as a mechanical stop to fine-tune the end position, but it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.