
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 475 mm stroke that can be dialed back by up to 40 mm, creating a precise 435 to 475 mm usable travel window for fine-tuning at commissioning.
This variant includes a built-in magnet for position sensing with AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel features sensor grooves on both sides for flexible mounting, while the carbon steel rod and M10x1.25 thread provide a robust interface for your mechanical couplings.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 435-475 mm stroke window during product size changes to set new end positions without physically swapping the cylinder.
Provide adjustable physical stops for diverter gates or push-off mechanisms where the exact travel distance needs minor on-site tweaking.
Use the rear adjuster to set precise lower travel limits during equipment commissioning, ensuring perfect alignment before final lockdown.
If your application requires greater thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. Because the 475 mm stroke is relatively long for this bore size, an external guide is recommended to prevent excessive side-loading on the rod.
The rear adjuster acts strictly as a travel stop for deceleration and positioning, not a lock; the cylinder will not hold a load without live air. For load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder. This SAIJ model is dimensionally interchangeable per ISO 15552, uses a PT tapered port, and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
If operated at 0.7 MPa, the push force increases to 563 N.
The rear adjuster allows you to shorten the 475 mm nominal stroke by up to 40 mm, giving an effective travel range of 435 to 475 mm. This stopper only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.