
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 475 mm travel by up to 50 mm for a precise 425-475 mm usable window. This size features a 12 mm rod and M10x1.25 thread, providing a compact footprint for lighter-duty tuning tasks.
Because the adjuster acts purely as a mechanical stop on the retract end, it cannot hold a load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE or DMSE switches if you add a magnet later. You can fine-tune the end position at commissioning without swapping the cylinder or adding external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 425-475 mm travel window during product size transitions without physically swapping cylinders or repositioning hard stops.
Ideal for diverting or gating items on a line where the retract position needs occasional fine-tuning to accommodate different package lengths.
Use the rear adjuster to micro-adjust the retract end position during initial machine setup, ensuring precise alignment before locking down the run parameters.
The adjustable stroke is ideal for product-size changeovers on a line, whereas a fixed SAI cylinder suits dedicated single-purpose stations. Remember that the rear screw sets the travel limit but does not function as a lock; for load-holding without live pressure, consider an external rod lock or the SAIL series.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 475 mm stroke, 50 mm adjustment range, PT port thread, and your required mounting bracket. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. Since the 475 mm stroke is relatively long for this small bore, ensure adequate external guiding to prevent excessive side-loading on the 12 mm rod.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from the 475 mm nominal length down to 425 mm. It sets the travel end but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.