verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-75

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke475 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$96.27 $103.77Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-75

The AirTAC SAIJ32X475-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection integration.

This 32mm bore unit uses a G1/8 port and a 12mm carbon steel rod with an M10x1.25 thread. Because the 475mm stroke is relatively long for this bore size, relying on the rod alone for side loads is not recommended; an external guide will preserve bearing life. The rear screw acts purely as a travel stop for fine-tuning and deceleration, not as a lock to hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-75 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X475-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke475 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-75

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×475Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-75 Is Used

tune

Product Changeovers

Quickly reconfigure the extended reach from 400 to 475mm on packaging lines when handling different carton depths, avoiding physical cylinder swaps.

precision_manufacturing

End-Position Trimming

Fine-tune the retract stop during machine commissioning to achieve exact seating of lightweight components without adding external stops.

settings_input_component

Adjustable Ejection

Dial in the precise ejection distance for small parts on an assembly conveyor, allowing operators to adjust the 75mm window on the fly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-75 the Right Cylinder?

Choose this adjustable model when your setup requires variable end-stops or frequent product changeovers, rather than committing to a fixed-stroke SAI cylinder. If your application demands more thrust, stepping up to the 40mm bore yields 628N at 0.5 MPa, but the 32mm bore is ideal for lighter duty. For load-holding without continuous air pressure, a standard SAIJ is insufficient—you should look at the SAIL or BSAI series instead.

To match this exact ISO 15552 footprint for a direct replacement, specify the 32mm bore, 475mm nominal stroke, 75mm adjustment range, PT tapered port thread, and carbon steel rod. Mounting is limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Given the 475mm stroke, ensure your mounting choice supports the cylinder adequately to prevent rod deflection.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-75 FAQ

If operated at 0.7 MPa, the push force increases to 563N.

The rear adjuster screw lets you shorten the 475mm nominal stroke by up to 75mm, creating a usable travel window of 400 to 475mm. It functions as a mechanical stop for end-position tuning and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X475-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.