
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X475-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X475-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the 475 mm nominal stroke by up to 75 mm, creating a precise 400-475 mm usable travel window. Equipped with a standard carbon steel piston rod and a magnet for position sensing, it delivers 402 N of pull force at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic solid-state switches for versatile mounting.
Rather than relying on fixed stops, the rear adjuster screw acts as an external stopper to fine-tune the retract end position during commissioning without swapping the cylinder. It is important to note that this adjuster and the variable air cushions only decelerate the load; they do not hold the rod in place without live air pressure. For applications requiring true load-holding, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X475-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the retract end position within the 400-475 mm window when switching product sizes on a packaging line, eliminating the need to physically swap cylinders.
Use the rear adjuster screw to set precise retract limits during initial commissioning, allowing exact positioning of sub-assemblies without adding external mechanical stops.
Leverage the integrated magnet and dual barrel grooves to mount CMSE or DMSE sensors exactly where needed along the 475 mm stroke for reliable automated feedback.
Choose this 32 mm bore adjustable cylinder when your setup requires end-position tuning across a 400-475 mm window during product changeovers. It provides 402 N pull force at 0.5 MPa; if your application needs more thrust, stepping up to the 40 mm bore increases that pull force to 528 N. As a dimensionally interchangeable ISO 15552 cylinder, it matches the bore, stroke, 75 mm adjustment, PT tapered port, and Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting footprint of standard SAI units.
Because the nominal 475 mm stroke is relatively long for a 32 mm bore, the 12 mm rod and M10x1.25 thread should be paired with an external guide to prevent excessive side-loading and rod deflection. If your machine requires absolute position holding without continuous air pressure, this plain SAIJ model will not suffice—you would need the SAIL lock or BSAI clamp-lock variant.
Quick checklist
If operated at 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as an external stopper that allows you to shorten the effective stroke from 475 mm down to as little as 400 mm. This provides a 75 mm tuning window for precise end-position setup during commissioning or product changeover.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.