
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X50-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X50-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 50 mm nominal stroke that can be fine-tuned down by up to 10 mm, creating a precise 40-50 mm usable travel window.
This variant includes a magnetic piston (-S) for position sensing and uses a standard carbon steel rod. The extruded aluminum barrel integrates sensor grooves on both sides, allowing you to install AirTAC CMSE reed or DMSE electronic switches exactly where needed without external brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 40-50 mm travel distance during machine commissioning to perfect part seating without machining hard stops.
Quickly adjust the rear screw by up to 10 mm to accommodate slightly different product lengths on a high-mix assembly line.
Choose this 32 mm bore when you need exact end-position tuning at commissioning without swapping cylinders or adding external stops. The rear adjuster acts purely as a travel stop for deceleration and positioning, not a lock; a plain SAIJ does not hold loads without live air, so consider an AirTAC SAIL or BSAI for fail-safe load holding.
To match this exact ISO 15552 footprint for a replacement, specify the 32 mm bore, 50 mm stroke, 10 mm adjustment range, PT tapered port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR brackets.
Quick checklist
It features a rear adjusting screw that lets you shorten the effective stroke by up to 10 mm. This provides a usable travel window of 40-50 mm, allowing you to set the exact retract end-position without modifying the cylinder mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.