verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X50-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke50 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$58.84 $66.34Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-20

The AirTAC SAIJ32X50-20 is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It provides a 30-50mm usable travel window, letting you trim the 50mm nominal stroke by up to 20mm during commissioning.

The external rear screw sets the retract end position without adding bulky external stops. It acts purely as a travel stop and does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X50-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke50 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-20 Is Used

tune

Machine Setup Tuning

Dial in the exact 30-50mm travel window during commissioning to perfect the end-position without replacing the cylinder or adding external stopper blocks.

settings_input_component

Product Changeover

Quickly adjust the retract stop on a packaging line to accommodate slight variations in product size, keeping downtime to a minimum.

precision_manufacturing

Variable End Stops

Use the 20mm adjustment range to fine-tune the stroke on small assembly fixtures where a fixed 50mm stroke would be too rigid.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-20 the Right Cylinder?

If you need less force, a 25mm bore is not available in this series, so step down by selecting a smaller cylinder family; if you need more power, step up to the 40mm bore, which provides 628N at 0.5 MPa. The adjustable stroke is ideal for machine setups requiring precise end-position tuning without swapping cylinders.

For ISO 15552 replacement matching, verify the 50mm stroke, 20mm adjustment range, PT tapered port thread, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is under 300mm, side-load stress is minimal, but long unsupported loads still need an external guide. For load-holding without live air, consider the SAIL or BSAI series instead of relying on this adjuster.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-20 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.

The rear adjuster screw lets you shorten the 50mm nominal stroke by up to 20mm, creating a 30-50mm usable travel window. The screw functions as an end stop and does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X50-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.