
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X50-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X50-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 30-50 mm usable travel window by allowing you to dial back the 50 mm nominal stroke by up to 20 mm.
This bore features a 12 mm carbon steel rod and M10x1.25 thread, which handles basic side loads, while the extruded aluminum barrel integrates sensor grooves on both sides. The integrated -S magnet pairs directly with AirTAC CMSE reed and DMSE solid-state switches for exact end-of-travel detection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the exact end-of-stroke position during machine setup, adjusting the 30-50 mm travel window to dial in precise sensor triggers.
Quickly adapt the cylinder's effective stroke on a packaging line when running different package lengths without replacing the actuator.
Set custom retract positions for delicate pick-and-place operations, using the rear screw to limit travel and prevent mechanical collisions.
An adjustable stroke is selected over a fixed SAI when a machine requires fine end-position tuning during commissioning or product changeover without swapping hardware. The rear adjuster acts as a travel stop, not a lock; for fail-safe load holding without live air, use an external pilot-operated check valve or the SAIL series. To match this ISO 15552 replacement: 32 mm bore, 50 mm stroke, 20 mm adjustment, PT tapered port, and -S magnet.
Quick checklist
It can deliver up to 724 N at 0.9 MPa.
The rear adjuster screw lets you shorten the 50 mm nominal stroke by up to 20 mm, creating a 30-50 mm usable travel window. This stopper only sets the end position and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.